Card Reader Connection

The PRT-WX-DIN and the RDM2 provide access control functionality allowing the connection of 2 Wiegand devices to control 2 doors (entry or exit only) or they can be configured in multiplex mode to allow 4 Wiegand devices controlling 2 doors giving the flexibility of entry and exit readers without the need for additional hardware.

• The card reader must be connected to the Controller port using a shielded cable
• The shield connection must only be connected at one end of the cable in the metallic enclosure (frame grounded)
• Do not connect the shield to a V- connection on the Controller
• Do not join the shield and black wires at the reading device
• Do not connect the shield to any shield used for isolated communication

Note: All Protege Readers are shipped with single LED mode set as default