Arming the Area

If we press the [Arm] key, once testing is complete, the Area should go into exit delay.

The exit delay function will now be triggered and any output(s) associated with it will be turned on or pulsed.

In our case, the keypad beeper should start making short beeps.

Whenever a key is pressed on the keypad, the system grabs control of the beeper output so that a key press results in a beep. This will take priority over anything else trying to turn the beeper output on. After approximately 5 seconds the system will release control of the beeper output and anything trying to turn it on will then be allowed control.