Trouble Group Options: General

• AC Failure: AC Failure has occurred on one or more devices in the system.
• Battery Problem: A Low Battery or Missing Battery on one or more devices in the system.
• Clock Loss: The Real Time Clock has not been set since the System Controller has powered up. To reset the associated trouble set the time from the time menu.
• Reporting Failure: The System Controller has failed to get a report through to the monitoring station in the programmed number of attempts. This will restore when the next reporting event is successful.
• Phone Line Fault: The phone line is either cut or damaged on the system controller.
• Zone Fault: A zone in the system is tampered or short circuited.
• Fire Loop: A fire zone has a loop fault.
• Power Fault: A power problem (Auxiliary, Fuse or Analog) has occurred on the System Controller or a device in the system.
• Bell Fault: The Bell Output on the system controller or a device in the system has either been disconnected or it has shut down due to excessive current consumption.